Hi all!

After installing update 1, found this strange things on the setups of the MINI WRC, DS3 WRC 2011 and Fiesta RS WRC 2011:

On the Differential Torques, the Front Diff have a very strange value: 5000.000000 Nm, and you can't change it :/, the default for the Polo and others is 500-600, so having 5000.00000 it's too strange. On the same section " Differential Torques" the Handbrake Release is set to 100% (usually is 0%) and the Left Foot Braking Theresold is set to 0% (usually is 5%) and you can't change these too. So, the only car that's "GOOD" is the Polo R WRC.
On the MINI S2000 is a different story: the Front Diff have 5000 (without the other 0's) but you CAN change it. The handbrake Release is set to 100% and the Left Foot Braking Theresold is set to 0% too, but you CAN change.

Also, on the same cars: MINI WRC, DS3 WRC 2011 and Fiesta RS WRC 2011 you can't hit full rev, it stops 4-5 squares before the end. And on the MINI S2000 it stops 2-3 squares before.

Any ideas what's the issue ?
Thanks in advance.

5000 Nm is normally on the central diff.
The new WRC do not have Central Diff, so we have to block it with a high value to simulate no diff.

Handbrake and left foot brake are set as these car do not have central diff (no effect of left foot braking and handbrake on the differential).
100% and 0% are normal values on these conditions.

About the rev, it is normal, the WRC car of this category are about 6500 / 6750 tr/min.

Oh, yeah, it was on the Center Diff.

So it was all ok, lol. I'm such a newbie :p
Thanks for clarifying it

Why Mini WRC is so bouncing especially on gravel? If I know anything about rally cars, I think on WRCs has to be best mounting including strings and dampers. After some test I have to brake very much before any bounce or jump. When I change the car to Group H cars, I can drive same bounce with full speed.

I will be a manager for Brazil WRT pro team, so I really want to know what to do about that thing. No one of my drivers will finish a race on gravel with that mounting..

At least could anyone say how to do setups for car like this. I think I'm quite good to do setups for cars, but now I'm hopeless.

Best request TheJonne

Hi TheJonne, there is an error on the Physics of Mini WRC, it will be corrected as soon as practicable before the start of WRC championship.

Ah bah tient je me posais la question

Il faut changé quoi dans les setup pour qu'il soit réglementaire ?

Ok. I thought I have done very bad mistake by taking Mini for WRC.

Thanks to clarify that.

bas vérifie tes setups avec le contrôleur est tu verra  

C'est pas une question qu'il soit règlementaire, c'est juste que la géométrie par défaut de la voiture n'est pas la bonne, il faut attendre une mise à jour pour avoir une géométrie plus conforme au réel.

It will be done before start the championship.
I hope to be able to send all the needed correction on physics for the 16 January.

We are trying to do our best.