forum.rallyesim.fr
http://forum.rallyesim.fr/

TUTORIAL [fr/eng] Conversion Fichiers Catia V5 vers 3dsmax
http://forum.rallyesim.fr/viewtopic.php?f=38&t=484
Page 1 sur 1

Auteur:  Aube [ Sam 23 Mai 2009 22:37 ]
Sujet du message:  TUTORIAL [fr/eng] Conversion Fichiers Catia V5 vers 3dsmax

Message de Nico77

Deux étapes sont nécessaire, la première est la conversion dans catia des élements en .stl, et la deuxième est l'import de ces fichiers dans 3dsmax.


La première étape est donc la conversion des fichiers natifs catia (.CATPart) en .stl

L'interêt est, d'une part que 3dmax lit ce format, et d'autre part que catia permet de paramétrer la création du stl.
Cela permet de donner plus ou moins de précision lors de la conversion suivant les zones. Le plancher par exemple ne nécessitera pas un grand niveau de détail et pourra être facétisé grossièrement, alors que le volant devra être très fin.

1- Ouvrir le fichier CATpart
2- Passer dans l'atelier "STL Prototypage rapide" (qui permet le réglage de la précision du stl)

Image

3- Cliquer sur l'icone "Facettisation"

Image

4- Une fenêtre apparait et permet le reglage
Selectionner les éléments à mailler (ils deviennent orange)
Régler la flèche, plus la valeur est importante plus le fichier sera léger mais grossier, puis cliquer sur Appliquer, puis OK.

Image Image


5- Reste à faire un "enregistrer sous" en selectionnant le format .stl
et le tour est joué.

Refaire la même opération pour chaque éléments nécéssitant une précision différente.

Merci à Flat-twin qui m'a donné cette méthodo  :)

A toi villou pour la suite  :wink:

Auteur:  obelix [ Mar 10 Jan 2012 12:17 ]
Sujet du message:  Re: [TUTORIAL] Converting files Catia V5 to 3dsmax

Two steps are necessary, the first is the conversion in catia .stl elements, and the second is the import of these files in 3dsmax.


The first step is therefore the conversion of files native catia (.)(CATPart) in .stl

The interest is, on the one hand that 3dmax reads this format, and on the other hand catia to set up the creation of the stl.
This allows to give more or less precision in the conversion following areas. The floor for example will not require a high level of detail and can be drawn roughly, while driving will be very fine.
1 - Open the CATpart file
2 - Pass in the rapid 'STL prototyping' workshop (which allows the setting of the precision of the stl)

Image

3 - Click on the icon "Facétisation"

Image

4 - A window appears and allows the setting
Select the items to mesh (they become orange)
Adjust the arrow, the more value more the file will be light but coarse, and then click apply, then OK.

Image Image

5 - Left to do a "save under" by selecting the .stl format
and the round is played.

Repeat the same operation for each items requiring a different precision.

Thanks to Flat-twin who m'a given this method

Translation: Obelix  With the help of  "Google Translate"

Page 1 sur 1 Heures au format UTC + 1 heure [ Heure d’été ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/