Nous sommes le Jeu 28 Mar 2024 17:41


Règles du forum


Tout ces tutoriels ont été recopiés depuis l'ancien forum.
Merci à leurs différents auteurs.
Tout post de tutoriel est soumis à l'approbation d'un modérateur.
Ce forum n'est pas un forum de support, toute demande de support sera systématiquement refusée.

All these tutorials were copied from the old forum.
Thank you to their various authors.
Any tutorial post is subject to approval by a moderator.
This forum is not a forum of support, any request of support will be systematically refused.

Poster un nouveau sujet Ce sujet est verrouillé, vous ne pouvez pas éditer de messages ou poster d’autres réponses.  [ 2 messages ] 
 TUTORIAL [fr/eng] Modifications du compteur 
Auteur Message
Administrateur du site
Administrateur du site
Bug-TrackerDéveloppeurStaff Rallyesim


Avatar de l’utilisateur

Inscription:
Sam 28 Mar 2009 21:02
Age: 60
Messages: 7488
Localisation: CLERMONT-FERRAND
Team: Aucune
Ecurie: Aucune
Pseudo Live: PHIL63

France (fr)

Message TUTORIAL [fr/eng] Modifications du compteur
Prérequis :

Il vous faut un logiciel permettant d'éditer la couche Alpha des fichiers DDS.
Si vous ne possédez pas ce genre de logiciel téléchargez DXTBmp (gratuit) qui vous permettra d'éditer les fichiers DDS avec votre logiciel de dessin habituel :
Télécharger DXTBmp
Installez le, lancez le et cliquez sur le bouton qui se trouve à droite pour définir quel est votre logiciel de dessin habituel.
Image

---> Modifications pour une résolution en 1024 x 768
---> Modifications pour une résolution supérieure ou égale à 1280 x  960

-> Modification du fichier DDS pour une résolution en 1024 x 768 :
- Renommez le fichier ..\DossierDuJeu\Misc.rbz en Misc.zip
- Faites un Clic droit dessus et "extraire ici" (ou un truc du genre, ça dépend du logiciel que vous utilisez pour décompresser les zip)
- Renommez le fichier ..\DossierDuJeu\Misc.zip en Misc.rbz (opération inverse de celle juste avant)
- Allez dans le dossier Misc nouvellement créé et sélectionnez tous les fichiers ini, faites un clic droit et tu choisissez "propriétés", là décochez "lecture seule"
- Editez le fichier digidash.ini (pas de chiffre dans le nom) et remplacez le contenu par celui ci-dessous :
Citation:
; Hud position
415 ;<---------------------Là il va falloir que vous tâtonniez pour trouver la bonne valeur
315 ;<---------------------Là il va falloir que vous tâtonniez pour trouver la bonne valeur
;
; Hud Size ( if width=0, then a default value will be used)
1
1
;
; Gear X positions
121        ; R
121        ; N
146.0        ; 1
121        ; 2
124.3        ; 3
121        ; 4
121        ; 5
121        ; 6
121        ; Backlight
;
; Gear Y positions
61        ; R
64.3        ; N
64.5        ; 1
61        ; 2
61        ; 3
64.3        ; 4
61        ; 5
61        ; 6
61        ; Backlight
;        
; Revmeter positions ( interleaved X / Y ) last firs
2000 22.8
2000 22.8
2000 22.8

2000 22.8
2000 22.8
2000.6 22.8
2000 22.8
2000 22.8

2000 22.8
2000 22.8
2000 22.8
2000 22.8
2000 22.8

2000 22.8
2000 22.8
2000 23.5
2000 24.8
2000 26.8

2000  30.8
2000  37.6
2000  46.5
2000  54.4
2000  63.2

2000  71.2
2000  78.7
2000  87.6
2000  99.6
2000  111.6
;                
; Turbometer X        
2000
2000
2000
2000
2000
2000
2000 ; moved offscreen
2000 ; moved offscreen
2000 ;move outside screen.
;
; Turbometer Y
2000
2000
2000
2000
2000
2000
2000
2000
2000
;
; Speedometer X Y
2000 102
;
; Distance 1 xy
2000 75
;
; Distance 2 xy
2000 96
;
; Engine temp
2000 73
;
; Warning positions interleaved xy
2000        120
2000        122
2000        122
2000        122
2000        122
2000        121
; Speed label X Y
2000 90
; Turbo label X Y
2000 48
; Temperature label X Y
2000 61
; Distance labels X Y
2000 61
2000 81
2000 102
; RPM label X Y
2000 30
; RPM Numbers xy must be 8 of them
2000 114
2000 94
2000 63
2000 28
2000 14
2000 14
2000 14
2000 14
; Gear change indicators x y two of them
2000 5
2000 5
;
; Alpha color, first is background alpha
; second is for unlit elements, third lit
0.0
0.10
0.45
;
; X1000 Label X Y
2000 14
; Not ending in $ will make computer sad
$

- Enregistrez les modifications

- Editez le fichier digidash_1024.ini (pas de chiffre dans le nom) et remplacez le contenu par celui ci-dessous :
Citation:
; Hud position
700
532
; Hud Size ( if width=0, then a default value will be used)
150
147
;
; Gear X positions
186        ; R
186        ; N
226        ; 1
186        ; 2
192        ; 3
185        ; 4
186        ; 5
186        ; 6
186        ; Backlight
;
; Gear Y positions
101        ; R
106        ; N
106        ; 1
101        ; 2
101        ; 3
101        ; 4
101        ; 5
101        ; 6
101        ; Backlight
;        
; Revmeter positions ( interleaved X / Y ) last firs
239 42
230 42
221 42

212 42
203 42
194 42
185 42
176 42

167 42
158 42
149 42
140 42
131 42

122 42
111 42
101 43
88  45
71  48

54  54
40  65
33  80
30  93
29  107

29  121
29  133
29  148
29  170
29  192                
;                        
; Turbometer X        
149
168
187
206
225
244
263
582 ;offscreen
501 ;offscreen
;
; Turbometer Y
82
82
82
82
82
82
82
82
82
;
; Speedometer X Y
247 162
;
; Distance 1 xy
97 125
;
; Distance 2 xy
97 162
;
; Engine temp
247 122
;
; Warning positions interleaved xy
101        201
123        204
149        205
176        205
200        204
224        202
; Speed label X Y
250 147
; Turbo label X Y
101 83
; Temperature label X Y
247 105
; Distance labels X Y
97 105
150 135
150 173
; RPM label X Y
242 52
; RPM Numbers xy must be 8 of them
16 185        ; 1
14 162        ; 2
14 118        ; 3
38 52        ; 4
104 26        ; 5
147 26        ; 6
176 26        ; 7
224 26        ; 8
; Gear change indicators x y two of them
79 8
159 8
;
; Alpha color, first is background alpha
; second is for unlit elements, third lit
0.0
0.10
0.45
;
; X1000 Label X Y
196 26
; Not ending in $ will make computer sad
$

- Enregistrez les modifications

- Allez dans le dossier ..\DossierDuJeu\Generic
- Sélectionnez tous les fichiers DDS et retirez l'attribut de lecture seule comme précédemment
- Éditez le fichier PC_1024_06.dds avec un logiciel supportant l'édition de la couche Alpha
  • Avec DXTBmp, faites glisser le fichier DDS dans la fenêtre de DXTBmp
  • Cliquez sur la petite flèche qui pointe vers le bas et qui se trouve juste sous l'affichage de la couche Alpha (en haut et à droite dans la fenêtre principale).
  • Une fois la couche Alpha affichée dans votre logiciel habituel continuez les étapes ci-dessous.
- Dans la couche Alpha, "peindre en noir les deux zones entourées en rouge sur l'image ci-dessous :

- Éditez le fichier PC_1024_03.dds avec un logiciel supportant l'édition de la couche Alpha
  • Avec DXTBmp, faites glisser le fichier DDS dans la fenêtre de DXTBmp
  • Cliquez sur la petite flèche qui pointe vers le bas et qui se trouve juste sous l'affichage de la couche Alpha (en haut et à droite dans la fenêtre principale).
  • Une fois la couche Alpha affichée dans votre logiciel habituel continuez les étapes ci-dessous.
- Dans la couche Alpha, "peindre" en noir les zones zones blanches pour que le résultat ressemble à celui ci-dessous :


C'est fini, ou presque, il vous restes à tâtonner un peu pour ajuster l'affichage des vitesses sur l'écran.



-> Modification du fichier DDS pour une résolution supérieure ou égale à 1280 x  960 :
- Renommez le fichier ..\DossierDuJeu\Misc.rbz en Misc.zip
- Faites un Clic droit dessus et "extraire ici" (ou un truc du genre, ça dépend du logiciel que vous utilisez pour décompresser les zip)
- Renommez le fichier ..\DossierDuJeu\Misc.zip en Misc.rbz (opération inverse de celle juste avant)
- Allez dans le dossier Misc nouvellement créé et sélectionnez tous les fichiers ini, faites un clic droit et tu choisissez "propriétés", là décochez "lecture seule"
- Editez le fichier digidash.ini (pas de chiffre dans le nom) et remplacez le contenu par celui ci-dessous :
Citation:
; Hud position
415 ;<---------------------Là il va falloir que vous tâtonniez pour trouver la bonne valeur
315 ;<---------------------Là il va falloir que vous tâtonniez pour trouver la bonne valeur
;
; Hud Size ( if width=0, then a default value will be used)
1
1
;
; Gear X positions
121        ; R
121        ; N
146.0        ; 1
121        ; 2
124.3        ; 3
121        ; 4
121        ; 5
121        ; 6
121        ; Backlight
;
; Gear Y positions
61        ; R
64.3        ; N
64.5        ; 1
61        ; 2
61        ; 3
64.3        ; 4
61        ; 5
61        ; 6
61        ; Backlight
;        
; Revmeter positions ( interleaved X / Y ) last firs
2000 22.8
2000 22.8
2000 22.8

2000 22.8
2000 22.8
2000.6 22.8
2000 22.8
2000 22.8

2000 22.8
2000 22.8
2000 22.8
2000 22.8
2000 22.8

2000 22.8
2000 22.8
2000 23.5
2000 24.8
2000 26.8

2000  30.8
2000  37.6
2000  46.5
2000  54.4
2000  63.2

2000  71.2
2000  78.7
2000  87.6
2000  99.6
2000  111.6
;                
; Turbometer X        
2000
2000
2000
2000
2000
2000
2000 ; moved offscreen
2000 ; moved offscreen
2000 ;move outside screen.
;
; Turbometer Y
2000
2000
2000
2000
2000
2000
2000
2000
2000
;
; Speedometer X Y
2000 102
;
; Distance 1 xy
2000 75
;
; Distance 2 xy
2000 96
;
; Engine temp
2000 73
;
; Warning positions interleaved xy
2000        120
2000        122
2000        122
2000        122
2000        122
2000        121
; Speed label X Y
2000 90
; Turbo label X Y
2000 48
; Temperature label X Y
2000 61
; Distance labels X Y
2000 61
2000 81
2000 102
; RPM label X Y
2000 30
; RPM Numbers xy must be 8 of them
2000 114
2000 94
2000 63
2000 28
2000 14
2000 14
2000 14
2000 14
; Gear change indicators x y two of them
2000 5
2000 5
;
; Alpha color, first is background alpha
; second is for unlit elements, third lit
0.0
0.10
0.45
;
; X1000 Label X Y
2000 14
; Not ending in $ will make computer sad
$

- Enregistrez les modifications

- Editez le fichier digidash_1280.ini (pas de chiffre dans le nom) et remplacez le contenu par celui ci-dessous :
Citation:
; Hud position
855
715
;
; Hud Size ( if width=0, then a default value will be used)
195
180
;
; Gear X positions
240        ; R
240        ; N
290        ; 1
240        ; 2
247        ; 3
240        ; 4
240        ; 5
240        ; 6
240        ; Backlight
;
; Gear Y positions
123        ; R
131        ; N
130        ; 1
123        ; 2
123        ; 3
131        ; 4
123        ; 5
123        ; 6
123        ; Backlight
;        
; Revmeter positions ( interleaved X / Y ) last firs
309 54
297 54
285 54

273 54
261 54
249 54
237 54
225 54

213 54
201 54
189 54
177 54
165 54

153 54
138 54
125 55
109 57
88  61

66  69
49  83
40  101
36  117
36  136

36  153
36  168
36  186
36  211
36  236                
;                        
; Turbometer X        
201
224
247
270
293
316
339
562 ; offScreen!
585 ; offscreen!
;
; Turbometer Y
99
99
99
99
99
99
99
99
99
;
; Speedometer X Y
310 208
;
; Distance 1 xy
120 153
;
; Distance 2 xy
120 198
;
; Engine temp
310 150
;
; Warning positions interleaved xy
126        250
151        250
186        251
220        251
250        250
280        251
; Speed label X Y
321 186
; Turbo label X Y
137 100
; Temperature label X Y
314 129
; Distance labels X Y
120 129
197 166
197 212
; RPM label X Y
310 65
; RPM Numbers xy must be 8 of them
17 247        ; 1
17 198        ; 2
17 146        ; 3
48 66        ; 4
129 34        ; 5
175 34        ; 6
210 34        ; 7
273 34        ; 8
; Gear change indicators x y two of them
118 13
227 13
;
; Alpha color, first is background alpha
; second is for unlit elements, third lit
0.0
0.1
0.45
;
; X1000 Label X Y
252 34
; Not ending in $ will make computer sad
$


- Allez dans le dossier ..\DossierDuJeu\Generic
- Sélectionnez tous les fichiers DDS et retirez l'attribut de lecture seule comme précédemment
- Éditez le fichier PC_1280_04.dds avec un logiciel supportant l'édition de la couche Alpha
  • Avec DXTBmp, faites glisser le fichier DDS dans la fenêtre de DXTBmp
  • Cliquez sur la petite flèche qui pointe vers le bas et qui se trouve juste sous l'affichage de la couche Alpha (en haut et à droite dans la fenêtre principale).
  • Une fois la couche Alpha affichée dans votre logiciel habituel continuez les étapes ci-dessous.
- Dans la couche Alpha, "peindre" en noir les zones zones blanches pour que le résultat ressemble à celui ci-dessous :


C'est fini, ou presque, il vous restes à tâtonner un peu pour ajuster l'affichage des vitesses sur l'écran.

--= PAS DE SUPPORT PAR MP =--, les réponses apportées sur le forum profitent à tous alors qu'une réponse en MP ne profite qu'à un seul individu.
Base de connaissance de RSRBR <--> FAQ de RSRBR<--> Utilitaire de dépannage RSRBR
Les serveurs du forum et du Live n'étant pas gratuits ;) soyez sympa, faites un don à rallyesim :)


Sam 25 Juin 2011 11:04
Profil Envoyer un e-mail Site Internet
Administrateur du site
Administrateur du site
Modérateur


Avatar de l’utilisateur

Inscription:
Dim 14 Juin 2009 17:51
Age: 75
Messages: 6954
Localisation: Sivry - Rance (Hainaut)
N° de pilote: 684
Pseudo Live: obelix

Belgium (be)

Message Re: [TUTORIEL] Changes to the counter
Prerequisites :

Need you a software to edit the layer Alpha files DDS.
If you do not have this kind of software download (free) DXTBmp which will allow you to edit files DDS with your usual drawing software
Télécharger DXTBmp
Install it, run, and click the button to the right to define what is your usual drawing software.

Image



-> Modification of the DDS file for a resolution in 1024 x 768 :
-Rename the file ..\DossierDuJeu\Misc.rbz en Misc.zip
-Right-click on it and "extract here" (or something of the sort, it depends on the software that you use to unpack the zip)
-Rename the file ..\DossierDuJeu\Misc.zip en Misc.rbz (opération inverse de celle juste avant)
-The newly created Misc folder and select all files ini, right click and you choose "Properties", then uncheck "read only"
- Edit the file digidash.ini (step of sales in the name) and replace the contents with the following
Citation:
; Hud position
415 ;<---------------------There will require that you are looking to find the correct value
315 ;<---------------------There will require that you are looking to find the correct value
;
; Hud Size ( if width=0, then a default value will be used)
1
1
;
; Gear X positions
121        ; R
121        ; N
146.0        ; 1
121        ; 2
124.3        ; 3
121        ; 4
121        ; 5
121        ; 6
121        ; Backlight
;
; Gear Y positions
61        ; R
64.3        ; N
64.5        ; 1
61        ; 2
61        ; 3
64.3        ; 4
61        ; 5
61        ; 6
61        ; Backlight
;        
; Revmeter positions ( interleaved X / Y ) last firs
2000 22.8
2000 22.8
2000 22.8

2000 22.8
2000 22.8
2000.6 22.8
2000 22.8
2000 22.8

2000 22.8
2000 22.8
2000 22.8
2000 22.8
2000 22.8

2000 22.8
2000 22.8
2000 23.5
2000 24.8
2000 26.8

2000  30.8
2000  37.6
2000  46.5
2000  54.4
2000  63.2

2000  71.2
2000  78.7
2000  87.6
2000  99.6
2000  111.6
;                
; Turbometer X        
2000
2000
2000
2000
2000
2000
2000 ; moved offscreen
2000 ; moved offscreen
2000 ;move outside screen.
;
; Turbometer Y
2000
2000
2000
2000
2000
2000
2000
2000
2000
;
; Speedometer X Y
2000 102
;
; Distance 1 xy
2000 75
;
; Distance 2 xy
2000 96
;
; Engine temp
2000 73
;
; Warning positions interleaved xy
2000        120
2000        122
2000        122
2000        122
2000        122
2000        121
; Speed label X Y
2000 90
; Turbo label X Y
2000 48
; Temperature label X Y
2000 61
; Distance labels X Y
2000 61
2000 81
2000 102
; RPM label X Y
2000 30
; RPM Numbers xy must be 8 of them
2000 114
2000 94
2000 63
2000 28
2000 14
2000 14
2000 14
2000 14
; Gear change indicators x y two of them
2000 5
2000 5
;
; Alpha color, first is background alpha
; second is for unlit elements, third lit
0.0
0.10
0.45
;
; X1000 Label X Y
2000 14
; Not ending in $ will make computer sad
$

-Save the changes


- Edit the file digidash_1024.ini (step of sales in the name) and replace the contents with the following
Citation:
; Hud position
700
532
; Hud Size ( if width=0, then a default value will be used)
150
147
;
; Gear X positions
186        ; R
186        ; N
226        ; 1
186        ; 2
192        ; 3
185        ; 4
186        ; 5
186        ; 6
186        ; Backlight
;
; Gear Y positions
101        ; R
106        ; N
106        ; 1
101        ; 2
101        ; 3
101        ; 4
101        ; 5
101        ; 6
101        ; Backlight
;        
; Revmeter positions ( interleaved X / Y ) last firs
239 42
230 42
221 42

212 42
203 42
194 42
185 42
176 42

167 42
158 42
149 42
140 42
131 42

122 42
111 42
101 43
88  45
71  48

54  54
40  65
33  80
30  93
29  107

29  121
29  133
29  148
29  170
29  192                
;                        
; Turbometer X        
149
168
187
206
225
244
263
582 ;offscreen
501 ;offscreen
;
; Turbometer Y
82
82
82
82
82
82
82
82
82
;
; Speedometer X Y
247 162
;
; Distance 1 xy
97 125
;
; Distance 2 xy
97 162
;
; Engine temp
247 122
;
; Warning positions interleaved xy
101        201
123        204
149        205
176        205
200        204
224        202
; Speed label X Y
250 147
; Turbo label X Y
101 83
; Temperature label X Y
247 105
; Distance labels X Y
97 105
150 135
150 173
; RPM label X Y
242 52
; RPM Numbers xy must be 8 of them
16 185        ; 1
14 162        ; 2
14 118        ; 3
38 52        ; 4
104 26        ; 5
147 26        ; 6
176 26        ; 7
224 26        ; 8
; Gear change indicators x y two of them
79 8
159 8
;
; Alpha color, first is background alpha
; second is for unlit elements, third lit
0.0
0.10
0.45
;
; X1000 Label X Y
196 26
; Not ending in $ will make computer sad
$

-Save the changes

-Go to the folder ..\DossierDuJeu\Generic
- Select all DDS files and remove the attribute from read-only as previously
- Edit the filer PC_1024_06.dds with a software supporting the edition of the Alpha channel
  • With DXTBmp, Drag the DDS file in the DXTBmp window
  • Click the small arrow that points down and is located just below the display of the layer Alpha (at the top and right in the main window).
  • Once the layer Alpha displayed in your usual software continue the steps below.
-In the Alpha layer "paint in black two surrounded by areas in red on the image below"



-Edit the file PC_1024_03.dds with a software supporting the edition of the Alpha channel
  • With DXTBmp, drag the DDS file in the DXTBmp window
  • Click the small arrow that points down and is located just below the display of the layer Alpha (at the top and right in the main window).
  • Once the layer Alpha displayed in your usual software continue the steps below.
-In the Alpha layer "paint" in black areas white so that the result looks like below



It is finished, or almost, you have to search a little to adjust the speed the screen display.




-> Modification of the DDS file for a resolution greater than or equal à 1280 x  960 :
-Rename the file ..\DossierDuJeu\Misc.rbz en Misc.zip
- Right-click on it and "extract here" (or something of the sort, it depends on the software that you use to unpack the zip)
- Rename the file ..\DossierDuJeu\Misc.zip en Misc.rbz (opération inverse de celle juste avant)
-Newly created Misc folder and select all ini files, right click and you choose "Properties", then uncheck "read only"
-Edit the file digidash.ini (step of sales in the name) and replace the contents with the following
Citation:
; Hud position
415 ;<---------------------There will require that you are looking to find the correct value
315 ;<---------------------There will require that you are looking to find the correct value
;
; Hud Size ( if width=0, then a default value will be used)
1
1
;
; Gear X positions
121        ; R
121        ; N
146.0        ; 1
121        ; 2
124.3        ; 3
121        ; 4
121        ; 5
121        ; 6
121        ; Backlight
;
; Gear Y positions
61        ; R
64.3        ; N
64.5        ; 1
61        ; 2
61        ; 3
64.3        ; 4
61        ; 5
61        ; 6
61        ; Backlight
;        
; Revmeter positions ( interleaved X / Y ) last firs
2000 22.8
2000 22.8
2000 22.8

2000 22.8
2000 22.8
2000.6 22.8
2000 22.8
2000 22.8

2000 22.8
2000 22.8
2000 22.8
2000 22.8
2000 22.8

2000 22.8
2000 22.8
2000 23.5
2000 24.8
2000 26.8

2000  30.8
2000  37.6
2000  46.5
2000  54.4
2000  63.2

2000  71.2
2000  78.7
2000  87.6
2000  99.6
2000  111.6
;                
; Turbometer X        
2000
2000
2000
2000
2000
2000
2000 ; moved offscreen
2000 ; moved offscreen
2000 ;move outside screen.
;
; Turbometer Y
2000
2000
2000
2000
2000
2000
2000
2000
2000
;
; Speedometer X Y
2000 102
;
; Distance 1 xy
2000 75
;
; Distance 2 xy
2000 96
;
; Engine temp
2000 73
;
; Warning positions interleaved xy
2000        120
2000        122
2000        122
2000        122
2000        122
2000        121
; Speed label X Y
2000 90
; Turbo label X Y
2000 48
; Temperature label X Y
2000 61
; Distance labels X Y
2000 61
2000 81
2000 102
; RPM label X Y
2000 30
; RPM Numbers xy must be 8 of them
2000 114
2000 94
2000 63
2000 28
2000 14
2000 14
2000 14
2000 14
; Gear change indicators x y two of them
2000 5
2000 5
;
; Alpha color, first is background alpha
; second is for unlit elements, third lit
0.0
0.10
0.45
;
; X1000 Label X Y
2000 14
; Not ending in $ will make computer sad
$

- Save the changes

- Edit the file digidash_1280.ini (no sales in the name) and replace the contents with the following
Citation:
; Hud position
855
715
;
; Hud Size ( if width=0, then a default value will be used)
195
180
;
; Gear X positions
240        ; R
240        ; N
290        ; 1
240        ; 2
247        ; 3
240        ; 4
240        ; 5
240        ; 6
240        ; Backlight
;
; Gear Y positions
123        ; R
131        ; N
130        ; 1
123        ; 2
123        ; 3
131        ; 4
123        ; 5
123        ; 6
123        ; Backlight
;        
; Revmeter positions ( interleaved X / Y ) last firs
309 54
297 54
285 54

273 54
261 54
249 54
237 54
225 54

213 54
201 54
189 54
177 54
165 54

153 54
138 54
125 55
109 57
88  61

66  69
49  83
40  101
36  117
36  136

36  153
36  168
36  186
36  211
36  236                
;                        
; Turbometer X        
201
224
247
270
293
316
339
562 ; offScreen!
585 ; offscreen!
;
; Turbometer Y
99
99
99
99
99
99
99
99
99
;
; Speedometer X Y
310 208
;
; Distance 1 xy
120 153
;
; Distance 2 xy
120 198
;
; Engine temp
310 150
;
; Warning positions interleaved xy
126        250
151        250
186        251
220        251
250        250
280        251
; Speed label X Y
321 186
; Turbo label X Y
137 100
; Temperature label X Y
314 129
; Distance labels X Y
120 129
197 166
197 212
; RPM label X Y
310 65
; RPM Numbers xy must be 8 of them
17 247        ; 1
17 198        ; 2
17 146        ; 3
48 66        ; 4
129 34        ; 5
175 34        ; 6
210 34        ; 7
273 34        ; 8
; Gear change indicators x y two of them
118 13
227 13
;
; Alpha color, first is background alpha
; second is for unlit elements, third lit
0.0
0.1
0.45
;
; X1000 Label X Y
252 34
; Not ending in $ will make computer sad
$


- Go to the folder ..\DossierDuJeu\Generic
- Select all DDS files and remove the attribute from read-only as previously
-Edit the file PC_1280_04.dds with a software supporting the edition of the Alpha channel
  • With DXTBmp, drag the DDS file in the DXTBmp window
  • Click the small arrow that points down and is located just below the display of the layer Alpha (at the top and right in the main window).
  • Once the layer Alpha displayed in your usual software continue the steps below.
- In the Alpha layer "paint" in black areas white so that the result looks like below



It is finished, or almost, it you remains to grope a bit to adjust the speed the screen display.



Translation: Obelix  With the help of  "Google Translate"

Le français est une belle langue, essayons de la respecter !

Avant de poster: utilisez la fonction Rechercher et vous trouverez probablement solution à votre problème.
Before you post: use the function Search and you will probably find solution for your problem.

ImageImage

Utilitaire de dépannage RSRBR - Troubleshooting utility (Update 23)


Mar 3 Jan 2012 17:36
Profil
Afficher les messages postés depuis:  Trier par  
Poster un nouveau sujet Ce sujet est verrouillé, vous ne pouvez pas éditer de messages ou poster d’autres réponses.  [ 2 messages ] 

 

 En relation avec ce sujet 
En relation avec ce sujet Réponses Vus Dernier message
TUTORIAL [eng] RBRdll
de Aube » Mar 10 Jan 2012 21:00
4 Réponses 27265 Vus
Dernier message de VERY FAST TEAMVoir le dernier message  Sam 18 Aoû 2012 10:50
TUTORIAL [fr/eng] ControleSetups
de PHIL63 » Jeu 20 Jan 2011 19:20
1 Réponses 20401 Vus
Dernier message de AubeVoir le dernier message  Ven 21 Jan 2011 16:12
TUTORIAL [fr/eng] SKIN WIZARD
de Aube » Mar 2 Nov 2010 13:36
1 Réponses 13158 Vus
Dernier message de obelixVoir le dernier message  Dim 8 Jan 2012 19:16
TUTORIAL [fr/eng] Setup Manager
de Aube » Dim 24 Mai 2009 17:46
1 Réponses 11619 Vus
Dernier message de obelixVoir le dernier message  Ven 6 Jan 2012 13:44
TUTORIAL [fr/eng] Reglages volants G25/DFP Setups
de Aube » Sam 23 Mai 2009 22:12
1 Réponses 16540 Vus
Dernier message de obelixVoir le dernier message  Lun 9 Jan 2012 15:31

Qui est en ligne

Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 8 invités


Vous ne pouvez pas poster de nouveaux sujets
Vous ne pouvez pas répondre aux sujets
Vous ne pouvez pas éditer vos messages
Vous ne pouvez pas supprimer vos messages
Vous ne pouvez pas joindre des fichiers

Rechercher:
Aller à:  


Copyright © rallyesim.fr 2009 - 2012 - [ Contacter les administrateurs ]
ATTENTION : Aucun support à cette adresse / No support at this address

[Supprimer tous les cookies du forum]

Association Rallyesim enregistrée sous le numéro 245 du J.O. du 20 Août 2005



Powered by phpBB © phpBB Group.
Basé sur le thème WoW Green de Vjacheslav Trushkin
Traduction par: phpBB-fr.com