forum.rallyesim.fr
http://forum.rallyesim.fr/

Logitech Wheel, Fanatec Pedals not working together - RBR - Windows 10
http://forum.rallyesim.fr/viewtopic.php?f=6&t=25234
Page 1 sur 1

Auteur:  steveo916 [ Mer 8 Aoû 2018 10:56 ]
Sujet du message:  Logitech Wheel, Fanatec Pedals not working together - RBR - Windows 10

Hi,
I cannot get my G920 & my Fanatec CSp v3 pedals to work in RBR together.

If both are plugged in the Pedals work fine, The wheel buttons & paddles work however the steering rotation isn't assigned. The Logitech Gear shifter works.

when I click to assign the steering axis, sometimes I get "clutch" come up when I turn the wheel. When this happens the FFB option is highlighted and I can do a FFB test and the wheel will rotate, however the steering bar does not move when turning the wheel.

If I start the game with the pedals unplugged the wheel is detected as "wheel axis" and the turning works, however I have no pedals. If i then plug in the pedals and redetect hardware the wheel is lost.

In windows 10 the controllers are listed alphabetically so the pedals always show before the wheel.

I have spent hours googling trying to fix this and very little time playing the game(with keyboard :oops: )

This is me right now..... :((   *stress   ](*,)    :-O()

Auteur:  OuRaL [ Mer 8 Aoû 2018 13:22 ]
Sujet du message:  Re: Logitech Wheel, Fanatec Pedals not working together - RBR - Windows 10

You must be patient !  :-:
First, what Windows sees, RBR does not care and sees it in its own way ...  =;

I would proceed as follows:
First connect the steering wheel, not the pedals.
In RBR only (not RSRBR which must be closed), and in the MULLIGATAWNY profile, rule your steering wheel options,
shifting, buttons of the various controls, etc.

Save the job.

Close RBR.
Connect the pedals.
Restarts RBR, and goes in the options "redetect devices".
Then in the command options.

You do not take into account what can be displayed for the steering wheel and what you have already entered
before, you do not try to change, you only do the actions of the pedals.

Once the pedals are set, you go back to "redetect the devices", you validate and you return in the command options.
There, you should be able to adjust the steering wheel, if its parameters have changed, and the pedals if they too have changed.
Save the profile immediately.

Auteur:  steveo916 [ Mer 8 Aoû 2018 23:37 ]
Sujet du message:  Re: Logitech Wheel, Fanatec Pedals not working together - RBR - Windows 10

thanks for the reply however this doesn't work for me.

I don't have a MULLIGATAWNY profile, just the one I created myself.

as soon as I plug in my pedals it changes my steering to x-axis (throttle pedal) & the Throttle to the brake pedal.

Auteur:  OuRaL [ Mer 8 Aoû 2018 23:41 ]
Sujet du message:  Re: Logitech Wheel, Fanatec Pedals not working together - RBR - Windows 10

Ok .
You must create the MULLIGATAWNY profile .

o|:)

Auteur:  steveo916 [ Jeu 9 Aoû 2018 01:12 ]
Sujet du message:  Re: Logitech Wheel, Fanatec Pedals not working together - RBR - Windows 10

created Mulligatawny profile, no different.

Auteur:  OuRaL [ Jeu 9 Aoû 2018 07:08 ]
Sujet du message:  Re: Logitech Wheel, Fanatec Pedals not working together - RBR - Windows 10

What did you install: RBR only, RBR & RSRBR?
If it's RBR alone, you must have also installed the 2 updates of the game editor.
If it is with RSRBR, it is not necessary, they are included.

What is the origin of your game: download from a legal site, original CD?

Otherwise, sorry, no other suggestion ... except to double check:

version and up to date drivers.
usb ports used (G920 = usb 2.0) Fanatec, I do not remember, but I think it's also USB 2.0)

Try different ports if you have the option according to your motherboard.

Auteur:  steveo916 [ Jeu 9 Aoû 2018 15:25 ]
Sujet du message:  Re: Logitech Wheel, Fanatec Pedals not working together - RBR - Windows 10

I only have RBR installed (with the 2 patches) - so I have RBR_sse v1.02

I did download/run RBRSR however I uninstalled it in case it was messing up my controls in original.

downloaded via a link on Steam.

Thanks for your suggestions but I think an uninstall and return to Dirt Rally is on the cards. (it will suffice for the odd occasion when I fancy a bit of rallying)

Auteur:  OuRaL [ Jeu 9 Aoû 2018 16:13 ]
Sujet du message:  Re: Logitech Wheel, Fanatec Pedals not working together - RBR - Windows 10

It is far inferior to RBR, but hey, each his pleasure .  o|:)

Auteur:  steveo916 [ Ven 10 Aoû 2018 12:44 ]
Sujet du message:  Re: Logitech Wheel, Fanatec Pedals not working together - RBR - Windows 10

Thu 9 Aug 2018 15:13 here  OuRaL a écrit:
It is far inferior to RBR, but hey, each his pleasure .  o|:)


RBR may be better, however if I can't get it to work I don't really have much choice.

Auteur:  OuRaL [ Ven 10 Aoû 2018 15:00 ]
Sujet du message:  Re: Logitech Wheel, Fanatec Pedals not working together - RBR - Windows 10

Several other members of Rallyesim (whom I helped with success) are equipped substantially
like you, and managed to set up their devices successfully..
I think you have to miss out on essential things, but as I do not have the opportunity to be
on your PC, I can not help you more.

If the controls are set well "connected independently" in the options "controls" of RBR, ie, once the steering
wheel correctly, and the next time for the pedals, correctly too, it's up to you to play with the
RBR command "redetect devices" and restart RBR.

In my opinion, persist, but be methodical (and patient).
Sorry for not being able to help you anymore.

Page 1 sur 1 Heures au format UTC + 1 heure [ Heure d’été ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/