It is currently Sun 13 Oct 2024 01:58


 FAQ RSRBR 
RBR/RSRBR Install
Where can I find the original game Richard Burns Rally?
Should I keep the default installation path of RBR?
Do I have to have to install RBR before RSRBR?
Where is the installation tutorial RSRBR?
I like RSRBR20xx, do I have to pass RSRBR20xx new version?
Can I install RSRBR2014 on RSRBR2013?
When installing RSRBR, the software asks me to restart the computer, what to do?
I get the following error: Invalid Fingerprint
RSCenter load track but the game returns to the Windows desktop
Error on install track pack launching
Installing RSRBR on Windows 8
Where to find and how to use the MD5 software (check the validity of files)

Launching and using the game
RSRBR install-Physics file absent! Installation of RSRBR not valid!
How can I have access to all the cars and all special?
I do not see the new cars and/or stages: how can I do?
How to reduce or avoid lags (freeze)
Can I run solo with RSCenter (RSRBR) if I am not registered on the site RSRBRLive?
I can not connect to live, what to do?
I adjusted my position driving Camhack, do I save it?
The game starts but I have no menu in it, what to do?
I have no menu when I play in windowed mode, what to do?
Ratio problems (Screen size / game)
How to make a screenshot?
How to display FPS in games?
How to change sounds during the game?
I installed an update and since I can't see car packs, what can I do?
Launch the game under Windows 8

Replays
Comment voir mes replays avec RSNetwork08 ou RSCenter2009 ?
Pourquoi mon replay ne fonctionne pas ?
Comment puis-je obtenir d'autres vues caméra pour mes replays ?
Les replays de RSRBR08 sont ils compatibles avec RSRBR2009 ?

Support
J'ai besoins d'aide, comment faire ?
Je veux demander de l'aide sur le forum, comment faire ?

Compatibilité des matériels avec RBR/RSRBR
Ma carte graphique fait-elle partie des cartes incompatibles ?
Rappel de la configuration minimale pour RBR et RSRBR

Windows 8
Installation of RBR and RSRBR
Installation of Logitech drivers (G25, G27 and others)

 

 RBR/RSRBR Install 
» Where can I find the original game Richard Burns Rally?
You can find it occasionally in stores on outings "Collectors", or directly on the net.
Search via Google (or another search engine) and there are two solutions:
- Faster: download
- The least expensive: in CD or DVD on some auction sites

Top

» Should I keep the default installation path of RBR?
You can change the installation path RBR but it is not recommended UNLESS YOU USE WINDOWS VISTA, 7 or 8. In the latter case the change installation path is MANDATORY if you want to install more RSRBR RBR. In other cases, this change should be reserved for experienced users.

DO NOT INSTALL IN THE FOLLOWING FILES:
- Program Files
- Programs
- Users

Top

» Do I have to have to install RBR before RSRBR?
YES
RSRBR is only an Add'on for the game Richard Burns Rally.
It is essential to install it before RSRBR.
The game now costing less than ten euros ;) Do not copy, buy it!

Top

» Where is the installation tutorial RSRBR?
The tutorial is on the party: GENERAL TUTORIALS forum.
Direct access: TUTORIAL [fr/es/eng/it/pl] INSTALLATION RSRBR/RSRBR INSTALL

Top

» I like RSRBR20xx, do I have to pass RSRBR20xx new version?
Yes
- The installation of new car packs and track packs will no longer be compatible.
- Live part of RSRBR2013 be stopped from January 2014.

Top

» Can I install RSRBR2014 on RSRBR2013?
No
RSRBR2014 should be on a "clean" installation of RBR (reed tutorial RSRBR install)

In addition, part of the RSRBR Live no longer be available from the month of January 2014.

Top

» When installing RSRBR, the software asks me to restart the computer, what to do?
DO NOT RESTART YOUR COMPUTER BEFORE CLOSING THE INSTALLER!
Finish the installation normally, click 'Finish'

Top

» I get the following error: Invalid Fingerprint
The most likely cause:
Incorrect installation RSRBR.
RSRBR must be installed in the game folder and not in a subfolder.
Ex: The path "C:\Program Files\SCi Games\Richard Burns Rally\" is correct
but this path "C:\Program Files\SCi Games\Richard Burns Rally\RSRBR\" not correct.

Top

» RSCenter load track but the game returns to the Windows desktop
If you're on Windows Vista, Windows 7 or 8 the RichardBurnsRally_SSE.exe file was not declared in the Data Execution Prevention in Windows. This can also occur on Windows XP

Solution:

Before putting the executable RSRBR 2014 (.exe), please remove all the elders of the list, restart your computer and then perform the DEP follows:

With Windows XP
Press the "Windows" key (Windows logo) + "Pause" key.
Go to the Advanced tab under "Performance" click the "Settings" button.
In the new window you will in the "DEP data.
You check "Turn on DEP data for all programs and services except those I select:"

With Windows Vista / 7
Start Button » Control Panel » System » System and Maintenance.
Click on Advanced system settings. Administrator permission required.
Under Performance, click Settings.
Click on the tab DEP data, then click on "Turn on DEP data for all programs and services except those I select."

Then you click on the button "Add" and you add all the following software: (they are all at the root of game)
- RSCenter2014Alone.exe
- RSCenter2014Championships.exe
- RSCenter2014Menu.exe
- RSCenter2014Public.exe
- RSRBR3DRatio.exe
- RichardBurnsRally_SSE.exe
- RichardBurnsRally.exe
- RBR Startup.exe
- RBRdll.exe
- CamHack.exe
- LanceurAddOns.exe
- SETUP_MANAGER2.exe
- SKINS_MANAGER3.exe
- sendreplays.exe
- sendtimes.exe
- SkinsWizard.exe
- BackupRSRBR.exe
- Dattool.exe
- My3DManager.exe
- 7z.exe (only for 32bits computer)
- PaceNotesManager.exe (if you have install its)

Save changes, then re-boot your computer and you do a test :)

Top

» Error on install track pack launching
A downloaded file is corrupted.

Check if the files are corrupt with MD5 software (supplied by clicking the md5sum given next to the download file).

Solution:
Download the track pack file, taking care to empty the internet cache before.
Reinstall.

Top

» Installing RSRBR on Windows 8
As for Windows 7 RBR and RSRBR should not be installed in the following folders:
- C or D:\Programs
- C or D:\Program files (x86)
- C or D:\Users
.. and subfolders


Top

» Where to find and how to use the MD5 software (check the validity of files)
To check if a file is not corrupt, download this utility: VoirMD5.exe

Start MD5 software by double-clicking "VoirMD5.exe".
Drag the downloaded file into the window (left click the mouse to drag) file
After a few seconds the md5 sum of the file appears.
Compare it with the string displayed next to or below the link to download the file.

If the sum is the same, the file is valid.
If it is not, the file is corrupted.

Solution:
Empty internet cache imperatively then re-download the file.

Tip: Click directly on the MD5 checksum of a file to download "VoirMD5.exe"

Top


 Launching and using the game 
» RSRBR install-Physics file absent! Installation of RSRBR not valid!
"che88-bchurikov" has collected different solutions for this problem

Abstract:
Although the problem "Physics file is absent" most likely related to Windows not allowing the 7z.exe to unpack the physics file the ultimate solution was not found so far. This is because there are a lot of reasons the executable file could be blocked: antivirus or other installed security and protection software like Windows Defender or user account permissions. Once perfectly working RSRBR mod was spoiled just by installation of MS Flight Simulator. Uninstalling it back did not help though and, after trying anything else, I had to use the solution which known to always work but need to be desperate to use it: REINSTALL WINDOWS. The bright side is that over time Windows getting rotten and new install will make your machine fly and shine. .

SOLUTION 1
- Lower the Windows security level.
Start Menu / Control Panel / System / Under "Action Center"/ change User Account Control settings.
- Restart Windows.

SOLUTION 2
- Turn off Windows Defender
Start Menu/ Control Panel/ Windows Defender/ Tools/ Options/ Administrator/ and uncheck the “Use this program” option.
- Restart Windows.

SOLUTION 3
- Assign “Full Control” of your account to RSRBR folder.
Properties of RSRBR folder in your File Manager/ Security/ Select your account/ Change Permissions for User to Full Control.
- Restart Windows.

SOLUTION 4
- Replace 7z.exe
Download and install 7z archive software.
In the game root replace 7z.exe and 7z.dll with files from Program Files\7z installation.
For Window7/8 users need to add this 7x.exe to DEP exclusions list again!
- Restart Windows.

SOLUTION 5
- Made whole RSRBR mod folder as an exclusion in your antivirus.Made whole RSRBR mod folder as an exclusion in your antivirus.
It is always a good idea to exclude the possibility your antivirus or any other protective software went wild and behave not intelligently stopping all but known executables.

-----------------------------------------------------------------------------
If you read this anything else failed and the last resort is to:
- Repair Windows using installation disk or
- Rollback Windows to the beginning using restore points
Start Menu / Control Panel / System / Advanced System settings/ System Protection tab/ System Restore
(You will see restore points choice only if the system protection was on and enough disk space was allocated to it)
- Reinstall Windows from scratch. (It is the pain but it will work)

Top

» How can I have access to all the cars and all special?
This requires to create the 'MULLIGATAWNY' profile (without the quotes) and use it to play.
It is mandatory to use this profile with RSCenter

Top

» I do not see the new cars and/or stages: how can I do?
Use 'MULLIGATAWNY' profile to play.
This profile is required to play with RSCenter

Top

» How to reduce or avoid lags (freeze)
If your game is not fluid it may be that it simply comes from your hardware.
RBR is an old game but requires a lot of resources on your computer.

Here are some path that you will find some fluidity view to completely remove the lag.

- Start by opening the RichardBurnsRally.ini file located in the game folder with text editor such as Windows.
- Once the file is open, look for the following lines:
ParticleQuality = high
RenderCarShadow = true
RenderQuality = high
et remplacez les par les lignes ci-dessous :
ParticleQuality = medium
RenderCarShadow = False
RenderQuality = medium
if that is not enough, change again the lines and replace them with these:
ParticleQuality = medium
RenderCarShadow = False
RenderQuality = medium

If lines do not exist ... create its

Top

» Can I run solo with RSCenter (RSRBR) if I am not registered on the site RSRBRLive?
Yes
Simply click on the button "A" (Solo), choose pack, mod, etc ...
Click "GO"
Read RSCenter Tutorial

Top

» I can not connect to live, what to do?
Go on the Support RSRBRLive Site & Championnats and post a message at the end of the "RSRBRLivexxxx Problèmes inscriptions ICI/Register problem HERE" topic.

Top

» I adjusted my position driving Camhack, do I save it?
Yes
Once your driving position set, press CTRL + the numeric keypad with the characters & é or " and not on the numeric keypad
The next launch of the game, activating Camhack you find your driving position

Top

» The game starts but I have no menu in it, what to do?
Start by checking the MULLIGATAWNY profile was created (RSRBR automatically creates it)
Make sure the game resolution is lower than the resolution of your screen
If this does not solve your problem, post a message on the Software Support (Support Logiciel)

Top

» I have no menu when I play in windowed mode, what to do?
To play RBR / RSRBR "window mode", the resolution of the game should be lower or equal than your screen.
Ex: if your screen resolution is 1024x768 then you must configure the game resolution to 800x600 (1024x768 maximum).
If your screen resolution is 1280x1024 then you need to set the game resolution to 1024x768 (1280x1024 maximum).

Top

» Ratio problems (Screen size / game)
In settings RSCenter/3DRatio:
Select 16/9 and 1920x1080
Go to ..\Plugins\FixUp.ini file
Change this:
fullscreenWindow=1
fixAspectRatio=0

fixVSync=1
vSyncActive=1
headGasketDurability=0,65
centerMenu=0

Top

» How to make a screenshot?
Simply press the F11 key during game

The file will be created in the "Screenshots" folder found at the root of the game
Warning, the file is in BMP format, you can decrease the size by passing in your drawing tool (JPG, PNG, etc ...)

Top

» How to display FPS in games?
To view the "FPS" (Frames Per Second) in the game you must edit the ..\Richard Burns Rally\RichardBurnsRally.ini file
Create the following line:
ShowFPS=True
Save the changes and restart the game
The number of frames per second is displayed

Top

» How to change sounds during the game?
To do this you need to have the game in the plugins folder, a file named "eq_mix.dll"
By pressing the F9 key, it will bring up a small mixer to set different sounds as you like
Another pressing the F9 key will disappear mixer

Note that the settings are not saved and must enter each time you start the game

Top

» I installed an update and since I can't see car packs, what can I do?
Simply re-download pack(s) missing(s).
Do not re-use an old version of the car pack missing, it would not solve the situation.

Why I can not see the car packs? Because a new car has been added to this pack or a new 3D an existing car made its appearance.

Top

» Launch the game under Windows 8
To start RBR it is essential:
Go to the game folder
Right-click on the RichardBurnsRally_SSE.exe file
Select "Properties"
In the Properties window go to the "Compatibility" tab
then check "Run this program as an administrator"
or if several people use the computer with different Windows accounts
click "Change settings for all users" and check the "Run as administrator".
Do the same with the following files:
- RSCenter2014Menu.exe
- RSCenter2014Alone.exe
- RSCenter2014Public.exe
- RSCenter2014Championships.exe
- SendReplays.exe
- SendTimes.exe
- RSRBR3DRatio.exe
- SKINS_MANAGER3.exe
- SkinsWizard.exe
- SETUP_MANAGER2.exe
- CamHack.exe
- BackupRSRBR.exe
- Dattool.exe

Top


 Replays 
» Comment voir mes replays avec RSNetwork08 ou RSCenter2009 ?
C'est simple, lancez RSRBR4Live.exe ou RSNetwork08. En fonction du replay, choisissez : un pack de voitures, une voiture et la spéciale dans laquelle le replay a été enregistré. Dans le menu "RBR Game" cliquez sur "Original GamePlay"

Top

» Pourquoi mon replay ne fonctionne pas ?
La cause la plus probable est que vous n'avez pas sélectionné le bon pack ou le bon pays (ou spéciale). Les ancien replays enregistrés avec RSNetwork08 ne sont pas compatibles avec RSCenter2009.

Top

» Comment puis-je obtenir d'autres vues caméra pour mes replays ?
Utilisez le logiciel CamHack à lancer depuis l'interface de RSRBR.

Top

» Les replays de RSRBR08 sont ils compatibles avec RSRBR2009 ?
Non, pratiquement tous les physics des voitures ont été refait et le lancement d'un replay créé sous RSRBR08 ne fonctionnerait pas dans le meilleurs des cas :)

Top


 Support 
» J'ai besoins d'aide, comment faire ?
En premier lieu, utilisez la fonction "Rechercher" qui se trouve en haut sur la page d'accueil du forum. Une fois sur la page de recherche, tapez un ou des mots caractérisant bien votre problème. Si il s'agit d'une erreur, choisissez le forum "Base de connaissance de RSRBR4" et lancez votre recherche. Si vous n'obtenez pas de résultat concluant, relancez votre recherche en sélectionnant "Tous disponibles" pour le choix du forum de recherche. Enfin, si vous n'obtenez rien de concret, posez votre question sur le forum.

Top

» Je veux demander de l'aide sur le forum, comment faire ?
Si une chose a de l'importance, c'est bien la précision que vous apporterez pour décrire votre problème. Soyez aussi précis que possible car de dire "ça ne marche pas", ça n'aidera pas beaucoup la personne qui va vous dépanner. Dans tous les cas merci de bien vouloir préciser les éléments suivants : - Système d'exploitation (Windwos XP édition Pro/Familliale, Windows Vista etc) - RBR seul fonctionne t-il ? - Le mode de lancement de RSRBR (RSRBR4, RSRBR4Live etc..) - Voiture choisie - Spéciale choisie Avec ce minimum d'éléments, vous éviterez des posts inutiles, des questions fastidieuses et vous obtiendrez une réponse rapide à votre souci. N'oubliez pas que les personnes qui vont vous dépanner le font bénévolement et que rien ne les oblige à le faire, merci de rester poli et courtois.

Top


 Compatibilité des matériels avec RBR/RSRBR 
» Ma carte graphique fait-elle partie des cartes incompatibles ?
voici une liste de cartes graphiques connues comme incompatibles avec RBR NVIDIA TNT 2 Geforce 1 Geforce 64 FX5200 (très fort ralentissement en jeu) Geforce 2 based cards Geforce 2 MX Geforce 4 MX ATI Rage 128 based cards Radeon 7500 Radeon 7200 Radeon 7000 Radeon X200 (si processeur faible) 3DFX All 3dfx based graphics cards SIS Xabre 400 (this card technically supports shaders but the game does not work on it.) SIS 315 SIS 661 FX/GX Mirage Graphics (32 ou 64Mo) Toutes les cartes SIS intégrées à la carte mère INTEL Extreme onboard (Intel 845/Intel 865) 810 onboard Cette liste n'est bien sur pas exhaustive, même si votre carte graphique ne fait pas partie de cette liste il se peut qu'elle ne soit pas assez performante pour avoir un affichage fluide de RBR.

Top

» Rappel de la configuration minimale pour RBR et RSRBR
Pour RBR seul (données de l'éditeur du jeu) Système d'exploitation : Windows Me/2000/XP (SP1-SP2-SP3)/Vista Processeur : 2,6 Ghz Espace libre du disque dur : 3,6 Go RAM : 512 Mo Carte vidéo : 128 Mo dédiés Type nVidia GeForce FX 5600 ou ATI Radeon 9800 Carte son : Compatible Sound Blaster 64 Mo Ces spécifications sont des spécifications MINIMUM. Autrement dit ... Configuration conseillée pour RBR + RSRBR : Système d'exploitation : Windows XP SP3 / Vista Processeur : 3 Ghz (ou mieux Core 2 Duo) Espace libre sur le disque dur : 20 Go RAM : 2 Go Carte vidéo : GeForce 7800/8600/8800 ou ATI HDxxxx Carte son : Compatible Sound Blaster 64 Mo

Top


 Windows 8 
» Installation of RBR and RSRBR
Like with Windows 7 RBR et RSRBR must not be installed in the folders below :
- C:\Programmes
- C:\Program files (x86)
- C:\Users
- C:\Utilisateurs
.. and their sub-folders

It is also highly recommended to limit the UAC to the minimum level.

Top

» Installation of Logitech drivers (G25, G27 and others)
DO NOT CONNECT YOUR STEERING WHEEL UNTIL YOU HAVE INSTALLED THE DRIVERS
1 /
Download drivers here :
For a 32 bits version of Windows : http://download.rallyesim.fr/lgs510.exe
For a 64 bits version of Windows : http://download.rallyesim.fr/lgs510_x64.exe

2/
DO NOT START THE INSTALLATION PROGRAM UNTIL YOU HAVE DONE ALL OF THAT
(otherwise it will refuse to install on Windows 8)
- Go to the folder where is the file you downloaded
- Right click on it (either on lgs510.exe or lgs510_x64.exe)
- Select "Properties" and go in "Compatibility" tab
- Check the box "Run this program in compatibility mode for:" then select "Windows 7"
- Also check the box "Run this program as administrator"
- Confirm with OK
- Launch the driver installation of the steering wheel.
- Now you can run the profiler from Logitech and calibrate your steering wheel

Top



Jump to:  


Copyright © rallyesim.fr 2009 - 2012 - [ Contacter les administrateurs ]
ATTENTION : Aucun support à cette adresse / No support at this address

[Supprimer tous les cookies du forum]

Association Rallyesim enregistrée sous le numéro 245 du J.O. du 20 Août 2005



Powered by phpBB © phpBB Group.
Basé sur le thème WoW Green de Vjacheslav Trushkin